Next Level

Granite CNC buying guide

Choosing a CNC for granite starts with the work you need to finish: straight cuts, miters, drilling, milling or waterjet inside corners. Axis count alone does not tell you which operations a machine can complete.

Compare equipment
MACH 10
MACH 10.

Saw, CNC or sawjet?

A bridge saw uses a blade to cut slabs. CNC control automates programmed movement, but does not by itself add a machining spindle or waterjet. A 5-axis CNC can position its cutting head through additional orientations; the actual tools, travel and software still determine its jobs. A sawjet combines blade cutting and abrasive waterjet cutting. Do not treat a bridge saw, machining center and robotic sawjet as the same equipment.

Match the Next Level model

TURBO is a 4-axis bridge saw for everyday straight and miter cuts, not a substitute for every 5-axis operation. TURBO Plus is a 5-axis CNC bridge saw with blade and router, camera layout and vacuum part movement. MACH 10 is a 5-axis CNC bridge saw with an ISO30 side spindle and 9-position automatic tool changer for cutting, drilling, milling and contouring. TurboJet combines a blade and abrasive waterjet on one 5-axis bridge.

What are you comparing?

Park Industries identifies VOYAGER XP as a 5-axis CNC saw with a separate tool spindle. Breton describes Genya as a 5-axis monobloc disc-type cutting centre. Yellowstone Automation lists BearClaw as a 5-axis CNC bridge saw, Bobcat as a 3-axis bridge saw and Geyser as a CNC saw-waterjet. BACA identifies M-Series 240 as a mitering robotic sawjet using both sawblade and waterjet. These are useful starting categories, not a claim that their tooling, automation, footprint or output matches MACH 10.

Bring real jobs to the demo

Ask each supplier to process a representative granite or quartzite job with your slab thickness, sink geometry, miter detail and finish requirement. Record loading, programming, cutting, tool changes, manual repositioning and finishing time separately. A fast cutting pass is not the same as a finished countertop. Have the operator show the CAD/CAM workflow and the recovery procedure after a stopped job. For porcelain and sintered materials, confirm tooling and application approval rather than assuming all stone programs transfer unchanged.

Budget beyond the machine

Compare the written configuration: spindle tools and holders, blade, camera, vacuum movement, table, CAD/CAM license, nesting, training and installation. Check power, compressed air, water quality, clearance, rigging and the table-maintenance procedure. For a sawjet, also confirm abrasive consumption, high-pressure pump service and waterjet waste handling. When comparing used equipment, verify software transfer, service history and the cost of restoring missing tooling. Ask each supplier about support coverage and parts lead times; do not assume them from the brand name.

Next Level equipment

MACH 10

MACH 10

MACH 10 is the flagship of the MACH series: a 5-axis CNC bridge saw on a hot-dip galvanized monoblock that cuts, drills, mills and contours in one setup. An Italian ISO30 side spindle works from a 9-position automatic tool changer, an aluminum vacuum lifter repositions pieces on the table, and an internal live camera shows the work area on an extra monitor.

  • Main spindle (≈29 HP): 21.5 kW S6
  • Side spindle, 5.2 kW: ISO30 · 12,000 rpm
  • Automatic tool changer: 9 positions

Published equipment price: $204,900.00 USD.

Specifications, documents and quote
MACH 5 - MACH 5 and MACH 10 share the same frame and doors

MACH 5 and MACH 10 share the same frame and doors

MACH 5

MACH 5 is the MACH 10 platform with a different side spindle: a 7 kW (9.4 HP) ER32 spindle at up to 18,000 rpm, with tools changed by hand. It keeps the 5-axis head, the aluminum vacuum lifter, the internal live camera and the fully enclosed, hot-dip galvanized monoblock — to cut, drill, mill and contour in one setup.

  • Main spindle (≈29 HP): 21.5 kW S6
  • Side spindle, 7 kW: ER32 · 18,000 rpm
  • Dual-arm vacuum lifter: 700 kg

Published equipment price: $189,900.00 USD.

Specifications, documents and quote
MACH 1 - Shown with optional overhead camera; front doors not fitted

Shown with optional overhead camera; front doors not fitted

MACH 1

MACH 1 brings 5-axis CNC cutting to the shop on the same galvanized monoblock as the rest of the MACH series. One 21.5 kW spindle saws and mills: straight, diagonal and miter cuts, sink cut-outs, drilling, contours and profiles on a 3,800 × 2,400 mm hydraulic tilting table, programmed on a 21-inch touchscreen with Zeus by Pegasus.

  • Main spindle (≈29 HP): 21.5 kW S6
  • A 0–90° · C 0–370°: 5 axes
  • Tilting work table: 3,800 × 2,400 mm

Published equipment price: $148,900.00 USD.

Specifications, documents and quote
ECO MACH - Shown fully loaded (side spindle, overhead camera)

Shown fully loaded (side spindle, overhead camera)

ECO MACH

ECO MACH is the entry to the MACH series: a 5-axis CNC bridge saw on a hot-dip galvanized monoblock with a 13 kW spindle and a 3,500 × 2,000 mm hydraulic tilting table. Order it as the base machine, or fully loaded with the overhead slab camera, slab thickness probe, blade and tool presetting device and an ER32 side spindle for drilling and milling.

  • Main spindle, 6,000 rpm: 13 kW S6
  • A 0–90° · C 0–370°: 5 axes
  • Tilting work table: 3,500 × 2,000 mm

Published equipment price: $114,900.00 USD.

Specifications, documents and quote
Turbo - Turbo, Next Level design image

Turbo, Next Level design image

Turbo

Turbo is a straightforward 4-axis bridge saw for everyday straight and miter cutting. A 29.5 HP (22 kW) permanent-magnet motor, a head that rotates 360° and tilts to 46°, and a 15-inch PLC touchscreen with ready-made shape programs make it easy to learn and easy to keep running.

  • Saw motor (22 kW), up to 4,000 rpm: 29.5 HP
  • Cutting area (3,600 × 2,200 mm): 141¾ × 86⅝ in
  • Head rotation, C-axis: 0–360°

Published equipment price: $78,900.00 USD.

Specifications, documents and quote
Turbo Plus - Turbo Plus, Next Level image, front doors open

Turbo Plus, Next Level image, front doors open

Turbo Plus

Turbo Plus is a full 5-axis CNC bridge saw: blade and router on one head, camera photo layout, automatic nesting and vein matching, vacuum cups that move cut parts, and a table that tilts to 85°. Next Level builds it with every upgrade: precision linear guides, precision helical racks and industrial pneumatics, on a galvanized monoblock built to the TÜV standard.

  • Saw motor (22 kW): 29.5 HP
  • Router (7.5 kW), 15,000 rpm: 10 HP
  • C 0–360° · A 0–90°: 5-axis

Published equipment price: $119,900.00 USD.

Specifications, documents and quote
TurboJet - TurboJet, Next Level image (pump unit not shown)

TurboJet, Next Level image (pump unit not shown)

TurboJet

TurboJet puts a blade saw and an abrasive waterjet on one 5-axis bridge. The blade does the fast straight cuts; the waterjet cuts curves, small radii, inside corners and sink holes, even in sintered stone and porcelain, without moving the slab to another machine.

  • Saw motor (22 kW): 29.5 HP
  • Rated jet pressure (450 MPa): 65,000 psi
  • Camera photo layout: 20 MP

Published equipment price: $208,900.00 USD.

Specifications, documents and quote

Manufacturer references

Original summaries of public manufacturer information, checked 2026-11-12. These are category comparisons, not independent performance tests.

Official sourceWhat it supports
Park Industries VOYAGER XP5-axis CNC saw and separate spindle description.
Breton Genya5-axis monobloc disc-type cutting centre.
Yellowstone Automation machine rangeBearClaw, Bobcat and Geyser product categories.
BACA M-Series 240Mitering robotic sawjet with blade and waterjet.

Buying questions

Is MACH10 the same as MACH 10?

MACH10 is a common typed variant of Next Level MACH 10. The current product page and written configuration identify the model as MACH 10.

Is a 5-axis saw always the right choice?

No. Match the machine to the operations and finished work you need. A 4-axis saw can be appropriate for straight and miter cutting; routing and waterjet work require the corresponding equipment and tooling.

What is the difference between a bridge saw and a sawjet?

A bridge saw cuts with a blade. A sawjet combines blade cutting with an abrasive waterjet, allowing a different approach to inside corners and other cuts. Compare the actual tooling, programming and finishing requirements for your work.

Can a 5-axis CNC cut sink openings?

It depends on the machine, tooling and the geometry of the opening. A blade, routing spindle and abrasive waterjet each work differently; ask the supplier to demonstrate your specific sink cutout and finish requirements.

Does a CNC bridge saw also polish finished edges?

Do not assume it does. Verify the tools and operations included in the quoted machine and whether a separate edge polisher or manual finishing is needed for your required edge profile.

Build a Next Level equipment list and quote or request a sizing review.