Next Level

Slab storage and handling

Plan the path from receiving to storage, fabrication and dispatch. Select each rack, cart, table and attachment for the actual load and the approved handling method.

Compare equipment
10′ Heavy-Duty Slab Rack
10′ Heavy-Duty Slab Rack.

Storage is not transport

Slab racks, remnant racks and storage A-frames serve different arrangements of full slabs and offcuts. A transport cart is a separate handling product. Confirm permissible load, support spacing, slab dimensions, restraint requirements and the operating surface for the chosen product. A shared A-frame shape does not mean two products have the same transport approval.

Support the work

Fabrication tables and stands must support the intended workpiece and task. Shop carts and electric installation carts have their own load and movement requirements. Review support points for long pieces and sink cutouts, work height, wheel or foot arrangement, floor conditions and the route with the complete load. Do not infer capacity from appearance or combine supports without an approved method.

Attachments change the lift

A forklift boom or container-loading boom must be reviewed with the actual forklift and load. Attachment mass and reach change the usable lifting capacity. The Aardwolf AVLP4PRO is a below-hook vacuum lifter, not a self-propelled vacuum robot. It requires an approved lifting system and load arrangement. Obtain the relevant load chart and operating instructions rather than combining headline capacities.

Build the handling plan

Keep people clear of suspended or unstable stone and plan rack access, pedestrian separation, receiving space and waste removal. The self-dumping waste bin has its own operating and compatibility requirements. Confirm floor and anchoring requirements, inspections, consumables, freight and assembly with the supplier. Ask for a documented handling review before purchasing equipment for an unfamiliar load or site.

Next Level equipment

10′ Heavy-Duty Slab Rack

10′ Heavy-Duty Slab Rack

Two hot-dip galvanized ground rails and 16 removable square posts make a storage lane for full slabs and bundles. Slabs stand on wood inserts along both rail edges, never on bare steel, and lean onto the posts. The heavy-duty one of the two Next Level slab racks: it carries more slabs per rack.

  • total rating (30 t): 66,000 lb
  • per slot (5 t): 11,000 lb
  • removable posts: 16

Published equipment price: $2,789.05 USD.

Specifications, documents and quote
10′ Slab Rack

10′ Slab Rack

The lighter of the two Next Level slab racks: two hot-dip galvanized ground rails with 16 removable posts, and rubber strips on the rails under the slab edges. Same 10 ft storage lane as the heavy-duty rack, built from lighter steel for fewer slabs per rack, with a 44,000 lb total rating.

  • total rating (20 t): 44,000 lb
  • removable posts: 16
  • post height: 60 in

Published equipment price: $2,336.61 USD.

Specifications, documents and quote
10′ Round-Post Remnant Rack - Design shown with 20 posts. Next Level rack: 30 posts, 15 per rail

Design shown with 20 posts. Next Level rack: 30 posts, 15 per rail

10′ Round-Post Remnant Rack

Two 10 ft galvanized base rails with 15 post holes each and 30 round posts, 36 in high, keep remnants and offcuts standing, visible and sorted by material, color or job. Rubber on the base protects the stone edges from chipping.

  • round posts: 30
  • post height: 36 in
  • holes per rail: 15

Published equipment price: $823.46 USD.

Specifications, documents and quote
10′ Square-Post Remnant Rack

10′ Square-Post Remnant Rack

Two 10 ft galvanized base rails with 10 post holes each and 16 removable square posts, 36 in high, keep remnants and prefabricated pieces upright, sorted and easy to see. Rubber on the base protects the stone from chipping.

  • square posts: 16
  • post height: 36 in
  • holes per rail: 10

Published equipment price: $1,298.66 USD.

Specifications, documents and quote
Double‑Sided A‑Frame Rack

Double‑Sided A‑Frame Rack

Two A-frames joined by a removable crossbar hold slabs on both faces of one footprint. The channel-steel feet take wood inserts, so the slab edge sits on wood. Powder coated in Next Level blue and shipped knocked down in a carton.

  • manufacturer rating (20 t): 44,000 lb
  • 19.7 in (500 mm) deep each: 2 sides
  • frame height (1,440 mm): 56.7 in

Published equipment price: $382.46 USD.

Specifications, documents and quote
Single‑Sided A‑Frame Rack

Single‑Sided A‑Frame Rack

Two frames and a removable crossbar make one 31.5 in (800 mm) deep storage face, for a wall or an aisle reached from one side. Slabs stand on wood inserts in the channel-steel feet. Powder coated in Next Level blue and shipped knocked down.

  • manufacturer rating (10 t): 22,000 lb
  • storage depth (800 mm): 31.5 in
  • frame height (1,485 mm): 58.5 in

Published equipment price: $359.06 USD.

Specifications, documents and quote
8′ A‑Frame Transport Cart

8′ A‑Frame Transport Cart

A galvanized double-sided A-frame on a wheeled base moves slabs and fabricated pieces between stations. Pushing rods with ratchet straps hold the load, the casters pin on and off, and fork pockets on all four sides take a forklift.

  • rating (2 t): 4,400 lb
  • per side (406 mm): 16 in
  • A-posts: 5

Published equipment price: $2,677.46 USD.

Specifications, documents and quote
3,000 lb Galvanized Shop Cart

3,000 lb Galvanized Shop Cart

A hot-dip galvanized cart for countertops, remnants and panels between work areas. Pieces stand on the deck and lean on the upright frame; four 8 × 2 in swivel casters, two with brakes, make it easy to steer and to park.

  • max. load (1,360 kg): 3,000 lb
  • swivel casters: 8 × 2 in
  • height (1,245 mm): 49 in

Published equipment price: $352.71 USD.

Specifications, documents and quote
Electric Install Cart – Steel

Electric Install Cart – Steel

Lifts and tilts countertops and slabs electrically on two lifting columns, from flat to upright. Pieces rest on nylon strips and stainless-steel ball transfers so they slide into place without scratching. Steel frame in Next Level blue.

  • load (500 kg): 1,102 lb
  • electric lift (150 mm): 5.9 in
  • entrance width (650 mm): 25.6 in

Published equipment price: $6,524.06 USD.

Specifications, documents and quote
7′ Adjustable Fabrication Table

7′ Adjustable Fabrication Table

A galvanized fabrication table whose height adjusts from 31.5 to 43.3 in (800–1,100 mm), so each job is worked at the right height. The stone rests on four wood bearers; crank-operated leveler feet hold the table still and 5 in casters move it.

  • rating (1.5 t): 3,300 lb
  • adjustable height: 31.5–43.3 in
  • wood bearers: 4

Published equipment price: $1,259.06 USD.

Specifications, documents and quote
Adjustable Fabrication Stand

Adjustable Fabrication Stand

A hot-dip galvanized folding A-stand with screw height adjustment. Use two stands to carry a countertop or a slab at working height for cutting, polishing or sink cut-outs, in the shop or on site. It folds flat to 3.9 in (100 mm) for the truck.

  • height (700–900 mm): 27.6–35.4 in
  • load (1 t): 2,200 lb
  • self weight (17 kg): 37 lb

Published equipment price: $276.21 USD.

Specifications, documents and quote
Self‑Dumping Stone Waste Bin

Self‑Dumping Stone Waste Bin

A hot-dip galvanized 0.8 m³ tipping hopper on a wheeled base collects stone offcuts and fabrication debris where they are made. Roll it to the work, lift it with a forklift and tip it into a container or dumpster.

  • volume (0.8 m³): 28 ft³
  • hopper plate (5 mm): 0.2 in
  • self weight (280 kg): 617 lb

Published equipment price: $3,194.06 USD.

Specifications, documents and quote
Telescopic Forklift Boom

Telescopic Forklift Boom

A telescopic boom that slides onto the forks and turns a 3–7 t forklift into a yard crane for slab bundles, crates and equipment. Four boom positions trade reach for capacity; a swivel hook hangs from the boom end.

  • max. capacity (1.5 t): 3,300 lb
  • telescopic (2.2–3.4 m): 87–134 in
  • forklift class: 3–7 t

Published equipment price: $1,124.06 USD.

Specifications, documents and quote
20′ Container Loading Boom

20′ Container Loading Boom

A crane-hung C-shaped beam that reaches into a 20 ft container, so slab bundles are loaded and unloaded from the open end with an overhead or mobile crane, without a forklift inside the box.

  • capacity (5,000 kg): 11,000 lb
  • length (9,372 mm): 30 ft 9 in
  • self weight (3,100 kg): 6,830 lb

Published equipment price: $24,030.00 USD.

Specifications, documents and quote
Aardwolf AVLP4PRO

Aardwolf AVLP4PRO

A compressed-air vacuum lifter for slab work under a jib or bridge crane. Four 520 × 320 mm pads hold the slab, the frame tilts from flat to upright, and a battery-powered alarm watches the vacuum. All it needs is an air line.

  • Horizontal WLL (1,000 kg): 2,205 lb
  • Vertical WLL (500 kg): 1,102 lb
  • Tilt: 0–90°

Published equipment price: $6,988.00 USD.

Specifications, documents and quote

Buying questions

Does a forklift boom preserve the forklift’s rated capacity?

Do not assume so. The approved attachment, load center, reach and lift height determine usable capacity. Have the complete arrangement reviewed and use its approved capacity plate.

Build a Next Level equipment list and quote or request a sizing review.