Next Level

Equipment buying guides

Make the equipment fit the job. Buying guides across our complete public catalog: cutting, polishing, templating, water, air, lifting, storage and shop utilities.

Compare equipment
MACH 10
MACH 10.

Plan a complete shop

MACH 10

MACH 10

MACH 10 is the flagship of the MACH series: a 5-axis CNC bridge saw on a hot-dip galvanized monoblock that cuts, drills, mills and contours in one setup. An Italian ISO30 side spindle works from a 9-position automatic tool changer, an aluminum vacuum lifter repositions pieces on the table, and an internal live camera shows the work area on an extra monitor.

  • Main spindle (≈29 HP): 21.5 kW S6
  • Side spindle, 5.2 kW: ISO30 · 12,000 rpm
  • Automatic tool changer: 9 positions

Published equipment price: $204,900.00 USD.

Specifications, documents and quote
Pure Cycle 50 complete system: filter press, flocculant tank, pumps and clean-water tank

Complete system: press, flocculant tank and pump

Pure Cycle 50

Pure Cycle 50 is the compact closed loop for smaller shops. A 30 m² (323 ft²) stainless chamber filter press squeezes the stone solids into cakes, a 2,000-gallon tank stores the filtered water, and a 5.4 HP pump sends it back to your machines.

  • Filtered water, nominal (12 m³/h): 52.8 GPM
  • Filter area (30 m²): 323 ft²
  • Filtration (manufacturer-stated): 2 microns

Published equipment price: $58,900.00 USD.

Specifications, documents and quote
20 HP 3-in-1 Air Compressor

20 HP 3-in-1 Air Compressor

Compressor, dryer and air tank in one package. A 15 kW permanent-magnet motor drives the screw air end directly; the Inovance inverter matches its speed to your air demand.

  • 15 kW PM VSD motor: 20 HP
  • at 116 psi (2.30 m³/min): 81 CFM
  • ASME receiver (132 gal): 500 L

Published equipment price: $18,994.95 USD.

Specifications, documents and quote
SkyReach 600

SkyReach 600

A battery-electric vacuum lifter that drives itself to the slab, picks it up on six sponge pads and places it: the boom lifts, telescopes and shifts sideways, and the pad frame turns 360° and tilts, all from a wireless remote. At 810 mm (31.9 in) wide it is built for indoor installations.

  • Capacity, retracted (600 kg): 1,323 lb
  • Lifting height (3,700 mm): 12 ft 1¾ in
  • Chassis width (810 mm): 31.9 in

Published equipment price: $44,900.00 USD.

Specifications, documents and quote