A 3-in-1 compressor combines a rotary screw compressor, air dryer and receiver tank in one package. For a fabrication shop, compare delivered airflow and air quality at the required pressure, not horsepower alone.
The compressor produces compressed air, the dryer reduces moisture, and the receiver stores air to buffer changing demand. “3in1 compressor” and “3-in-1 compressor” describe this packaged arrangement, not a standardized performance rating. Confirm that the quote includes all three components and the required filtration and drains. An integrated package still needs suitable ventilation, electrical protection and piping.
CFM at your pressure
List the air demand and minimum pressure of the CNC, pneumatic tools and other equipment. Identify which loads operate together and which are intermittent. Compare rated CFM at the same pressure, then allow for distribution pressure loss, dryer conditions and future demand. More horsepower does not guarantee more usable air at the machine. Ask for published performance data at your operating point and the compressor-control behavior when demand is low.
The Next Level AIR range
AIR model names use horsepower; their established URLs remain AIR product pages even though the products are compressors. AIR 20 is a 20 HP permanent-magnet variable-speed screw compressor package with a dryer and 500 L ASME receiver. Its catalog airflow is 81 CFM at 116 psi, and its listed supply is 220 V, 60 Hz, three-phase. Check each larger AIR model’s own airflow, voltage and receiver specifications before selecting it; do not extrapolate from the model number.
Compare configurations fairly
Quincy describes QGS as a rotary screw compressor range with base-mount, tank-mount and tank-mount-with-dryer configurations. That makes the exact configuration important when comparing a QGS quote with an integrated AIR package. Confirm whether the quoted unit includes a dryer and tank, whether the drive is fixed or variable speed, and the airflow at your pressure. A base compressor price is not directly comparable to a complete 3-in-1 package price.
Installation and ownership
Have a qualified installer confirm electrical service, protective devices, room temperature, intake-air quality and ventilation. Ask for the dryer’s rated inlet conditions and pressure dew point, the filter grades, automatic drain arrangement and condensate disposal requirements. Confirm oil, separator and filter service intervals and how consumable costs are quoted. Receiver capacity smooths short peaks but cannot make up for an undersized compressor during sustained demand. Keep the machine’s air-quality requirements separate from any assumed shop-air standard.
Compare the quote
Use the same requirements for every supplier. Download a blank worksheet, keep one copy per proposal, and record the written evidence behind each answer.
Delivered air at pressure. List simultaneous machine demand and minimum inlet pressure. Request rated delivered CFM at that pressure, not horsepower alone.
Dryer and filtration. Request dryer inlet conditions, pressure dew point, filter grades and condensate disposal requirements.
Receiver and control. Confirm usable receiver volume, fixed or variable-speed control, low-demand behavior and the response to short peaks.
Utilities and site work. Request the electrical, water, air, drainage, clearance and foundation requirements that apply to the quoted configuration. Identify who supplies each connection.
Complete quoted cost. Separate equipment, options, tooling, freight, tax, rigging, installation and training. Identify exclusions and the quote currency and validity.
Delivery and acceptance. Request the written delivery estimate, unloading responsibilities, commissioning scope and acceptance procedure.
Service and consumables. Request warranty terms, support coverage, consumable part numbers, maintenance intervals and quoted parts lead times.
Documented configuration. Keep the dated proposal, exact model and configuration, manuals and supplier answers together. Resolve conflicting specifications in writing.
Opens in spreadsheet software. Next Level does not receive the information you enter in your downloaded worksheet. This worksheet is not engineering approval or a purchase contract.
Compressor, dryer and air tank in one package. A 11 kW permanent-magnet motor drives the screw air end directly; the Inovance inverter matches its speed to your air demand.
Compressor, dryer and air tank in one package. A 15 kW permanent-magnet motor drives the screw air end directly; the Inovance inverter matches its speed to your air demand.
Compressor, dryer and air tank in one package. A 22 kW permanent-magnet motor drives the screw air end directly; the Inovance inverter matches its speed to your air demand.
Compressor, dryer and air tank in one package. A 30 kW permanent-magnet motor drives the screw air end directly; the Inovance inverter matches its speed to your air demand.
Compressor, dryer and air tank in one package. A 37 kW permanent-magnet motor drives the screw air end directly; the Inovance inverter matches its speed to your air demand.
Published base-mount, tank-mount and tank-mount-with-dryer configurations.
Buying questions
Can I choose by horsepower alone?
No. Compare delivered airflow at the required pressure, simultaneous demand, dryer rating, control method and electrical supply. The receiver is a buffer, not additional compressor capacity.
Do I need a dryer for a CNC?
Follow the CNC manufacturer’s specified air quality and pressure. Ask the compressor supplier to size drying and filtration for the actual operating conditions rather than assuming the package name guarantees compatibility.
How much compressed air does a stone shop need?
Add the air requirements of the equipment that can run at the same time, at its required pressure. Discuss intermittent peaks, pressure loss, dryer conditions and expansion with the compressor supplier; a machine-by-machine demand list is more useful than a single horsepower estimate.
Does a larger air tank increase compressor output?
No. A receiver stores compressed air and buffers short demand peaks, but it does not increase the compressor’s sustained delivered airflow.
Pure Cycle is a closed-loop filter press water recycling system made for the stone and granite fabrication industry. Compare filtration, process-water supply and solids handling against your shop’s requirements.
Choosing a CNC for granite starts with the work you need to finish: straight cuts, miters, drilling, milling or waterjet inside corners. Axis count alone does not tell you which operations a machine can complete.
A forklift for granite slabs must be selected around the complete load, attachment and travel route. The model name or nominal capacity is not permission to lift every slab of that weight.
A vacuum lifter robot for granite must move and position the slab safely at the actual reach you need. Compare a self-propelled robot with another robot, not just with a below-hook suction frame.
Machining a finished edge and cutting an inside corner are different jobs. Choose the cutting process and tooling before comparing spindle power or axis count.
Start with the surface you need to finish: a slab face, a straight edge or a particular profile. Different polishing machines are designed for different work.
A site template records where the countertop must fit. A slab scan records the material you will cut. Connecting both correctly is the important workflow.
Plan the path from receiving to storage, fabrication and dispatch. Select each rack, cart, table and attachment for the actual load and the approved handling method.
Choose crane coverage around the pickup and placement locations. A lifting capacity alone does not define the reach, structure or complete installed system.