TurboJet 5-axis CNC sawjet
TurboJet puts a blade saw and an abrasive waterjet on one 5-axis bridge. The blade does the fast straight cuts; the waterjet cuts curves, small radii, inside corners and sink holes, even in sintered stone and porcelain, without moving the slab to another machine.
Online equipment price: $208,900.00 USD. MSRP/list: $234,900.00.
Estimated delivery: 3–5 months from Next Level’s receipt of financing funds.
If Next Level does not deliver within the delivery window stated in your signed contract, Next Level will cover your scheduled monthly financing payments after that deadline until the equipment is delivered.
Cash orders: confirm the start date with sales.

Specifications
| X / Y travel | 153½ × 111 in (3,900 × 2,820 mm) |
|---|---|
| Worktable | 157½ × 82⅝ in (4,000 × 2,100 mm); faced with concrete plate or rubber; tilts to 85° |
| Saw chamfering, max. | 141¾ × 82⅝ × 2¾ in (3,600 × 2,100 × 70 mm) |
| Waterjet cutting and chamfering, max. | 149⅝ × 82⅝ × 2⅜ in (3,800 × 2,100 × 60 mm) |
| Saw motor | 29.5 HP (22 kW) permanent magnet, variable frequency; 0–4,000 rpm |
| Blade | 17¾ in (450 mm); flange 2 in (50 mm) |
| Motor shaft | Inner water pipe; takes a drill or milling tool |
| Pump motor | 49.6 HP (37 kW) |
| Rated pressure | 65,000 psi (450 MPa) |
| Working pressure | 46,000–55,000 psi (320–380 MPa) |
| Flow | 0.98 GPM (3.7 L/min) |
| Orifice / mixing tube | 0.33 mm orifice; 1.02 mm mixing-tube bore |
| Intensifier | Boost ratio 20:1; up to 50 strokes/min; oil pump 80 mL/rev; fan and heat-sink cooling |
| Abrasive | 0–0.77 lb/min (0–350 g/min) |
| Jet head tilt | 0–50° |
| Axis speeds | X 164 / Y 131 / Z 26 ft/min (50 / 40 / 8 m/min) |
| Drives | X and Y: high-precision helical rack and pinion; Z: Ø40 × 40 mm ball screw |
| Servo | Bus servo drives with absolute encoders |
| Lubrication | X, Y and Z greased automatically |
| Control | 5-axis RTCP CNC; 21-inch industrial computer |
| Software | Automatic nesting and vein matching; shape and countertop libraries; DXF import; point-collection drawing; office license included |
| Connectivity | Wired network, Wi-Fi or phone hotspot; remote support |
| Camera | 20 MP, 1-inch CMOS industrial camera |
| Laser height gauge | European brand; measures along each cutting path, with air blow-off |
| Blade probe | Measures blade diameter automatically |
| Automatic sand feeder | 100 L; holds 331 lb (150 kg) of abrasive; 200–300 min of cutting |
| Feed pressure | 29–44 psi (2–3 bar) |
| Alarm | Low-sand alarm; can feed up to two jet heads |
| Standard | Built to the TÜV standard |
| Tank and chassis | Hot-dip galvanized, then painted |
| Electrical cabinet | Sealed, with industrial air conditioner |
| Guarding | 4 sliding doors with open-door power-off |
| Also included | Vacuum cups to move plates; operating handle; spare-parts kit |
| Next Level upgrade | Automatic sand-cleaning machine |
| Total power | 69 kW |
| Water | 13.2 GPM (3 m³/h) |
| Compressed air | 87 psi (6 bar) |
| Size with front sliding doors (L × W × H) | 20 ft 8¼ in × 17 ft 1⅜ in × 14 ft 3¼ in (6,304 × 5,215 × 4,349 mm) |
| Weight | 28,660 lb (13,000 kg) |
| Floor area with pump and console | 26 ft 3⅜ in × 22 ft 3⅞ in (8,012 × 6,804 mm) |
| High-pressure pump unit (L × W × H) | 51⅛ × 68⅞ × 59 in (1,300 × 1,750 × 1,500 mm); beside the left rail, 17¾ in (450 mm) from the machine |
| Sand supply tank | 27½ in Ø × 43¼ in high (700 × 1,100 mm) |
| Console | On a swing arm at the front right corner |
Included equipment
- TurboJet sawjet with high-pressure pump and automatic sand feeder.
- Next Level upgrade: automatic sand-cleaning machine.
- 21-inch industrial PC with the CNC software and office license.
- Camera, laser height gauge and blade probe.
- Vacuum cups to move plates; operating handle.
- Sealed electrical cabinet with industrial A/C.
- Spare-parts kit.
- Installation and operator training by Next Level technicians.
Applications
- Sink and basin holes, inside corners and small radii.
- Sintered stone, porcelain and ceramic as well as granite and quartz.
- Countertops cut, chamfered and holed on one table.
- Inlays, curves and shapes from DXF drawings.
Plan floor space for the pump and the sand feeder next to the machine, plus 87 psi (6 bar) compressed air. Abrasive, blades and wear parts are separate. Confirm your 3-phase voltage at order.
Product documents
Related equipment
- MACH 10 5-Axis CNC Bridge Saw with Tool Changer
- MACH 5 5-Axis CNC Bridge Saw with Vacuum Lifter
- MACH 1 5-Axis CNC Bridge Saw
- ECO MACH Fully Loaded 5-Axis CNC Bridge Saw
Equipment configuration, freight, tax, options and site requirements are confirmed with your quote. Interactive configuration and PDF generation require JavaScript.
Build your equipment quote · Equipment financing · Call (941) 900-3018




