NEXT LEVEL - Up your gameQuestions? +1 941-900-3018 · sales@nextlevel.plus

Plan your shop · 3D layout + quote

Place Next Level products in your building at true size, add existing shop equipment, note site conditions, and build a product quote. Save, share or download your layout and 3D file.

Mode
View
Immersive VR requires a WebXR-enabled headset browser (for example, Quest Browser). You can download the 3D layout (.glb) below for compatible VR viewers.
2D shop layout for printing
Loading 3D models…

Trench routes

Channel: 147 mm wide × 132 mm deep (about 5 3/4 × 5 1/4 in). Fixed product size.

1,000 mm sections; 100 mm internal width. Runs follow the shop axes with 90-degree corners only. Existing saved route widths/depths are corrected to this product size when loaded; diagonal routes must be redrawn. The grate sits at floor level and the channel is cut into the concrete floor in 2D and 3D. Excavation allowance is separate from channel size. Planning only: joints, cuts, drainage, slopes, loads, concrete and installation need approved drawings.

Air, water and electrical lines

Draw compressed-air pipe, water pipe and electrical conduit. Lines run along your walls by default and follow them around corners, with drops down to each machine; you can also run them overhead, or in the floor for electrical and water. The plan shows them in 2D and 3D and totals the length of every material and size.

Black: electrical (7 ft, disconnects 2 ft lower)Blue: water (24 in)Grey: compressed air (42 in)

Planning take-off only. Pipe sizing, pressure ratings, conduit fill, supports and code compliance are set by your installer and local inspector.

Walk through your shop

See your shop the way a person walking through it does. Pick a start and an end and the planner finds a walkway around your equipment, or draw the path yourself.

Your shop 0 items

Type feet and inches like 20' 6" or 20 6, or add m or mm to any value.

Existing floor and site conditions (optional)
Leave blank if unknown. As measured or from your drawings; not checked by this planner.

Ticked items are drawn in your 2D and 3D plan and listed on the quote PDF: footings under crane columns (jib cranes need a foundation, so this is ticked for you; free-standing cranes level on bolts, so tick it only if yours needs footings), pits cut into the floor under Pure Cycle (5×5×5 ft for the 25, 6×6×6 ft for the 50 and 100) and sludge dehydration (3×3×3 ft) systems with galvanized grating, and your trench routes cut into the concrete. They tick themselves when you add those products; untick to hide them. Sizes are planning sizes: change a pit in the item list.

Privacy: slab thickness, the boxes ticked and site notes are written into the share link, so anyone with the link can read them. Don't include private details.

Planning only, not engineering. This planner does not check concrete, crane foundations, water pits or trenches, loads, capacities or code compliance. Approved site drawings and engineering are required before construction or installation.

    2D and 3D use the same layout. Drag items to move them (6 in steps); arrow keys move the selected item, R turns it, Delete removes it. Undo/redo keeps the last 100 layout changes in this tab, including a complete drag or dial rotation as one change. Use Ctrl/Cmd+Z to undo and Ctrl/Cmd+Shift+Z to redo. In 2D, drag the floor to pan. Fans and high bays hang from the ceiling: set the drop below the ceiling for each one.

    Quote

    ProductQtyMSRPOnline priceTotal

    Budgetary quote from the Next Level price list (MSRP and online price, Nov 8, 2026). Configured cranes use the shared crane estimator and include its package scope; their dimensions are overall dimensions, not hook height or rail-center span. Member sections are illustrative, not structural specifications. Final pricing, specification and scope are confirmed by sales. Freight, installation, tax, rentals and site work require confirmation unless a package includes them. Nothing is sent from this page: email the PDF to sales@nextlevel.plus.

    Save, share, download

    3D on phones, tablets and computers

    Android phones, tablets and computers: open the .html file in Chrome, Edge, Firefox or Safari on a Mac. It works offline: drag to turn, pinch or scroll to zoom, two fingers to move, with 3D, top and eye-level views. iPhone and iPad: open the .usdz file from the Files app to turn and zoom the layout or place it in your room in AR. The .glb model is for 3D apps and VR headsets.

    My designs

      Designs and your last layout are kept in this browser on this device, including your contact details. Delete them when you use a shared computer. To open a design on another computer or phone, use the quote PDF (it carries the whole layout), the .json file or the share link.

      Share links include your slab thickness, ticked site items and site notes, visible to anyone who has the link. Contact details are not included.

      The .json keeps the room, trench routes, building features, floor and site notes, every item with its position, rotation and ceiling drop, the quote lines and your contact details, and reloads here to resume later. The share link carries the room, routes, features, site notes and items (not your contact details); the quote is rebuilt from it. Undo history is only kept in this tab, not in saved files. Nothing is stored on our servers. The quote PDF also carries the full layout: open it here with Open a saved file to see and change the exact plan. The .glb opens in compatible 3D, VR and AR viewers at true size in metres; if you entered a slab thickness it includes a slab of that thickness under the floor (visual only).

      Configure crane

      Options and budgetary pricing follow the shared crane estimator. Custom bays are 10–30 ft center-to-center and must total the runway length minus the fixed 4 ft combined end overhangs. Overall height is not hook height. Supports, hoists and member sizes are illustrative, not supplier structural specifications.

      Copies

      Place several copies in a straight line with exact spacing, for example high bay lights every 20 ft or racks along a wall. Add rows to make a grid.

      Details

      The pit sits centered under the unit with a galvanized grating at floor level. Excavation, walls, sealing and loads need approved site drawings.

      Add a building feature

      Building and site work are not included in equipment pricing. Positions and sizes are for planning; electrical, HVAC, plumbing and structural work need licensed design and approval.