Next Level

TurboJet side by side with other sawjets

Pick up to 5 machines from other makers. The table shows the figures each maker publishes, next to the TurboJet. Machines that combine a saw blade and an abrasive waterjet to cut stone.

Compare with 3 of 5 picked

Pick up to 5. The table updates as you pick.

Swipe the table sideways to see every machine.

TurboJet and the machines you picked: published specifications
SpecificationNext Level TurboJetPark Industries SABERjet XLMaker’s page for the Park Industries SABERjet XL (opens in a new tab)Park Industries JAVELINMaker’s page for the Park Industries JAVELIN (opens in a new tab)Breton TrinityMaker’s page for the Breton Trinity (opens in a new tab)Northwood Machine Raptor 32Maker’s page for the Northwood Machine Raptor 32 (opens in a new tab)Donatoni DJ 6.6Maker’s page for the Donatoni DJ 6.6 (opens in a new tab)BACA Systems Robo SawJet 2.0Maker’s page for the BACA Systems Robo SawJet 2.0 (opens in a new tab)BACA Systems Robo SawJet M Series 240Maker’s page for the BACA Systems Robo SawJet M Series 240 (opens in a new tab)
Machine typeSawjet: saw and waterjet on one 5-axis bridge5-axis sawjet5-axis sawjetSaw and waterjet centre5-axis simultaneous saw and waterjetDisc saw plus waterjet, 5+1 interpolated axesRobotic sawjet on a robot armRobotic sawjet on a KUKA KR240 robot
Axes and head movement5-axis RTCP CNCNot listedNot listedA 0–58°Not listedNot listedNot listedNot listed
Saw29.5 HP (22 kW) saw, 450 mm (17¾ in) blade27 hp saw, 14–16 in (356–406 mm) blade27 hp saw, 14–16 in (356–406 mm) bladeBlade up to 400 mm (15¾ in), 18 / 22 kW32 hp (20 hp option), 18 in (457 mm) blade · miter up to 48°Disc 300–625 mm (11¾–24⅝ in), 11 kW S1 / 13 kW S626 HP saw26 HP saw
Waterjet pump49.6 HP (37 kW)DynaMAXDynaMAX 50 or 60 hpNot listedKMT pump37 kW intensifier (49.6 hp)50 HP waterjet50 HP waterjet
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi working60,000 psi60,000 psiNot listed60,000 psiUp to 4,000 bar (58,000 psi)Not listedNot listed
Jet head tilt0–50°Not listedNot listedNot listedWaterjet miter up to 55°0–60°Not listedNot listed
Work table or largest slab157½ × 82⅝ in (4,000 × 2,100 mm); faced with concrete plate or rubber; tilts to 85°144 × 88 in (3,658 × 2,235 mm)Work area 144 × 88 in (3,658 × 2,235 mm)Worktop 3,650 × 2,150 mm (143¾ × 84⅝ in)156 × 96 in (3,962 × 2,438 mm) · single table, double optionalLargest slab 3,700 × 2,200 mm (145⅝ × 86⅝ in)Not listedDual table
Axis travel153½ × 111 in (3,900 × 2,820 mm)Not listedNot listedNot listedZ 14 in (356 mm)X 4,100 · Y 3,250 · Z 450 mm (161⅜ · 128 · 17¾ in)Not listedNot listed
Axis speedsX 164 / Y 131 / Z 26 ft/min (50 / 40 / 8 m/min)Not listedNot listedNot listedNot listedNot listedNot listedNot listed
Tilting tableTilts to 85°Not listedNot listedNot listedOptionalOptional, to 80°Not listedNot listed
Tool changerNot listedNot listedNot listedISO30, 12-position changerNot listedNot listedNot listedNot listed
Vacuum cups to move piecesVacuum cups to move platesNot listedNot listedNot listedNot listedSuction cups, 500 kg (1,102 lb)Not listedNot listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasive; 200–300 min of cuttingNot listedNot listedNot listedNot listedNot listedNot listedNot listed
Camera20 MP, 1-inch CMOS industrial cameraNot listedNot listedNot listedNot listedCamera listedNot listedNot listed
Control and software5-axis RTCP CNC; 21-inch industrial computerNot listedNot listedNot listedFANUC 31i-B5 PlusNot listedNot listedNot listed
Machine weight28,660 lb (13,000 kg)Not listedNot listedNot listedNot listedAbout 7,000 kg (15,432 lb)Not listedNot listed
TurboJet: published specifications, group 1 of 3
SpecificationNext LevelTurboJetPark IndustriesSABERjet XLPark IndustriesJAVELINBretonTrinity
Machine typeSawjet: saw and waterjet on one 5-axis bridge5-axis sawjet5-axis sawjetSaw and waterjet centre
Axes and head movement5-axis RTCP CNCNot listedNot listedA 0–58°
Saw29.5 HP (22 kW) saw, 450 mm (17¾ in) blade27 hp saw, 14–16 in (356–406 mm) blade27 hp saw, 14–16 in (356–406 mm) bladeBlade up to 400 mm (15¾ in), 18 / 22 kW
Waterjet pump49.6 HP (37 kW)DynaMAXDynaMAX 50 or 60 hpNot listed
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi working60,000 psi60,000 psiNot listed
Jet head tilt0–50°Not listedNot listedNot listed
Work table or largest slab157½ × 82⅝ in (4,000 × 2,100 mm); faced with concrete plate or rubber; tilts to 85°144 × 88 in (3,658 × 2,235 mm)Work area 144 × 88 in (3,658 × 2,235 mm)Worktop 3,650 × 2,150 mm (143¾ × 84⅝ in)
Axis travel153½ × 111 in (3,900 × 2,820 mm)Not listedNot listedNot listed
Axis speedsX 164 / Y 131 / Z 26 ft/min (50 / 40 / 8 m/min)Not listedNot listedNot listed
Tilting tableTilts to 85°Not listedNot listedNot listed
Tool changerNot listedNot listedNot listedISO30, 12-position changer
Vacuum cups to move piecesVacuum cups to move platesNot listedNot listedNot listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasive; 200–300 min of cuttingNot listedNot listedNot listed
Camera20 MP, 1-inch CMOS industrial cameraNot listedNot listedNot listed
Control and software5-axis RTCP CNC; 21-inch industrial computerNot listedNot listedNot listed
Machine weight28,660 lb (13,000 kg)Not listedNot listedNot listed
TurboJet: published specifications, group 2 of 3
SpecificationNext LevelTurboJetNorthwood MachineRaptor 32DonatoniDJ 6.6BACA SystemsRobo SawJet 2.0
Machine typeSawjet: saw and waterjet on one 5-axis bridge5-axis simultaneous saw and waterjetDisc saw plus waterjet, 5+1 interpolated axesRobotic sawjet on a robot arm
Axes and head movement5-axis RTCP CNCNot listedNot listedNot listed
Saw29.5 HP (22 kW) saw, 450 mm (17¾ in) blade32 hp (20 hp option), 18 in (457 mm) blade · miter up to 48°Disc 300–625 mm (11¾–24⅝ in), 11 kW S1 / 13 kW S626 HP saw
Waterjet pump49.6 HP (37 kW)KMT pump37 kW intensifier (49.6 hp)50 HP waterjet
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi working60,000 psiUp to 4,000 bar (58,000 psi)Not listed
Jet head tilt0–50°Waterjet miter up to 55°0–60°Not listed
Work table or largest slab157½ × 82⅝ in (4,000 × 2,100 mm); faced with concrete plate or rubber; tilts to 85°156 × 96 in (3,962 × 2,438 mm) · single table, double optionalLargest slab 3,700 × 2,200 mm (145⅝ × 86⅝ in)Not listed
Axis travel153½ × 111 in (3,900 × 2,820 mm)Z 14 in (356 mm)X 4,100 · Y 3,250 · Z 450 mm (161⅜ · 128 · 17¾ in)Not listed
Axis speedsX 164 / Y 131 / Z 26 ft/min (50 / 40 / 8 m/min)Not listedNot listedNot listed
Tilting tableTilts to 85°OptionalOptional, to 80°Not listed
Vacuum cups to move piecesVacuum cups to move platesNot listedSuction cups, 500 kg (1,102 lb)Not listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasive; 200–300 min of cuttingNot listedNot listedNot listed
Camera20 MP, 1-inch CMOS industrial cameraNot listedCamera listedNot listed
Control and software5-axis RTCP CNC; 21-inch industrial computerFANUC 31i-B5 PlusNot listedNot listed
Machine weight28,660 lb (13,000 kg)Not listedAbout 7,000 kg (15,432 lb)Not listed
TurboJet: published specifications, group 3 of 3
SpecificationNext LevelTurboJetBACA SystemsRobo SawJet M Series 240
Machine typeSawjet: saw and waterjet on one 5-axis bridgeRobotic sawjet on a KUKA KR240 robot
Axes and head movement5-axis RTCP CNCNot listed
Saw29.5 HP (22 kW) saw, 450 mm (17¾ in) blade26 HP saw
Waterjet pump49.6 HP (37 kW)50 HP waterjet
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi workingNot listed
Jet head tilt0–50°Not listed
Work table or largest slab157½ × 82⅝ in (4,000 × 2,100 mm); faced with concrete plate or rubber; tilts to 85°Dual table
Axis travel153½ × 111 in (3,900 × 2,820 mm)Not listed
Axis speedsX 164 / Y 131 / Z 26 ft/min (50 / 40 / 8 m/min)Not listed
Tilting tableTilts to 85°Not listed
Vacuum cups to move piecesVacuum cups to move platesNot listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasive; 200–300 min of cuttingNot listed
Camera20 MP, 1-inch CMOS industrial cameraNot listed
Control and software5-axis RTCP CNC; 21-inch industrial computerNot listed
Machine weight28,660 lb (13,000 kg)Not listed

Buying from Next Level

  • Every product page shows the price in U.S. dollars.
  • Build your equipment list and download a PDF quote right away, in English, Spanish or Portuguese.
  • A Next Level technician installs the machine at your shop and trains your operators; the included hours are listed for each machine.
  • If Next Level does not deliver within the window in your signed contract, Next Level covers your scheduled monthly financing payments until the equipment arrives.

Read more in Questions and answers and the Granite CNC buying guide.

Sources

Comparison updated November 12, 2026. Every competitor figure comes from the maker’s own page below. Values in brackets are unit conversions by Next Level, rounded. “Not listed” means the maker’s page does not give the figure; it does not mean the machine lacks it.