Next Level

Turbo side by side with other bridge saws

Pick up to 5 machines from other makers. The table shows the figures each maker publishes, next to the Turbo. Bridge saws and 5-axis CNC saws for granite, quartz, marble, porcelain and sintered stone.

Compare with 3 of 5 picked

Pick up to 5. The table updates as you pick.

Swipe the table sideways to see every machine.

Turbo and the machines you picked: published specifications
SpecificationNext Level TurboPark Industries YUKON IIMaker’s page for the Park Industries YUKON II (opens in a new tab)Achilli MBS TSMaker’s page for the Achilli MBS TS (opens in a new tab)Poseidon Lotus Bridge SawMaker’s page for the Poseidon Lotus Bridge Saw (opens in a new tab)Rye Corp Husky Gantry Bridge SawMaker’s page for the Rye Corp Husky Gantry Bridge Saw (opens in a new tab)Matrix Machine Corp VISION Bridge SawMaker’s page for the Matrix Machine Corp VISION Bridge Saw (opens in a new tab)Matrix Machine Corp ICON Bridge SawMaker’s page for the Matrix Machine Corp ICON Bridge Saw (opens in a new tab)DC Industrial Monoblock 925MAX Bridge SawMaker’s page for the DC Industrial Monoblock 925MAX Bridge Saw (opens in a new tab)MTE Bridgesaw Diamond4 (4-axis bridge saw)Maker’s page for the MTE Bridgesaw Diamond4 (4-axis bridge saw) (opens in a new tab)Biesse (GMM) Master Cut GO C M (formerly GMM Extra 480)Maker’s page for the Biesse (GMM) Master Cut GO C M (formerly GMM Extra 480) (opens in a new tab)
Machine typeBridge saw with PLC controlBridge saw, manual and semi-automatic modesBridge saw with CNC touchscreenBridge saw with motorized miteringGantry bridge sawEntry-level bridge sawBridge sawMonoblock bridge saw4-axis bridge saw5-axis CNC bridge saw
Axes and head movementC 0–360° head rotation · A 0° and 46° tiltOptional powered bridge miter 0–47°Manual head rotation in four positions or automatic rotation 0–360° · manual tilt 90°–45°Motorized 0–45° bridge mitering45° miter tiltAutomatic plunge miter 0–47°Automatic plunge miter 0–47°45° miter cuts90° rotating head5 axes
Blade diameter13¾–19⅝ in (350–500 mm)16–24 in (406–610 mm) countertop model; up to 28 in (711 mm) dimensional modelUp to 400 mm (15¾ in)16–20 in (406–508 mm)Up to 18 in (457 mm)Not listedNot listed14–24 in (356–610 mm)12–16 in (305–406 mm)Up to 625 mm (24⅝ in)
Saw motor29.5 HP (22 kW) permanent-magnet motor, variable frequency, up to 4,000 rpm20 hp (14.9 kW)15 kW (20 HP)25 hp (18.6 kW)20 hp (14.9 kW)20 hp (14.9 kW)20 HP (14.9 kW) with variable-frequency drive25 hp (18.6 kW) · blade 1,800–2,500 rpm20 hp (14.9 kW)13 / 16.5 kW (17.4 / 22.1 hp)
Work table or largest slab141¾ × 86⅝ in (3,600 × 2,200 mm); PVC faced with a rubber matLargest slab 144 × 84 in (3,658 × 2,134 mm)Not listedNot listedRotating 6 × 10 ft tilt tableNot listedNot listedNot listedWork envelope 138 × 79 in (3,505 × 2,007 mm)3,800 × 2,250 mm (149⅝ × 88⅝ in)
Axis travel11¾ in (300 mm)Not listedX 3,500 · Y 2,250 · Z 350 mm (137¾ · 88⅝ · 13¾ in)X 140 · Y 130 · Z 18 in (3,556 · 3,302 · 457 mm)16 in (406 mm) vertical travelNot listedNot listedNot listedNot listedNot listed
Tilting tableNot listedPowered tilt table, 0–70°; confirm configurationNot listedNot listedRotating tilt tableRotating hydraulic tilt tableRotating hydraulic tilt tableNot listedHydraulic table rotates 360° and tilts 85°Not listed
Milling and tool changeNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedSide spindle 4 kW, 12,000 rpm · 4-position tool changer
Vacuum cups to move piecesNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedVacuum lifting up to 500 kg (1,102 lb)
CameraNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedCamera listed
Control and softwarePLC with motion controller and cutting program; 15-inch touchscreen (not a PC)Manual and semi-automatic modes · laserCNC touchscreenTouchscreen in English, Spanish and PortugueseWireless remote · optional 8-inch touchpadButton panel · green laser10-inch color touchscreen with AutoCut II programmable cutting · 8-position wireless remote · green laserTouchscreen, remote control and buttonsSiemens touchscreen · wireless remote · laser-guided cuttingNot listed
Frame and guardingGalvanized machine frame with back panelNot listedNot listedNot listedNot listedNot listedNot listedNot listedGalvanized frameNot listed
Machine size18 ft 10⅜ in × 13 ft 7⅜ in × 11 ft 5¾ in (5,750 × 4,150 × 3,500 mm)Not listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listed
Machine weight9,921 lb (4,500 kg)Not listedNot listedNot listedNot listedNot listedNot listedNot listedNot listedNot listed
Turbo: published specifications, group 1 of 3
SpecificationNext LevelTurboPark IndustriesYUKON IIAchilliMBS TSPoseidonLotus Bridge Saw
Machine typeBridge saw with PLC controlBridge saw, manual and semi-automatic modesBridge saw with CNC touchscreenBridge saw with motorized mitering
Axes and head movementC 0–360° head rotation · A 0° and 46° tiltOptional powered bridge miter 0–47°Manual head rotation in four positions or automatic rotation 0–360° · manual tilt 90°–45°Motorized 0–45° bridge mitering
Blade diameter13¾–19⅝ in (350–500 mm)16–24 in (406–610 mm) countertop model; up to 28 in (711 mm) dimensional modelUp to 400 mm (15¾ in)16–20 in (406–508 mm)
Saw motor29.5 HP (22 kW) permanent-magnet motor, variable frequency, up to 4,000 rpm20 hp (14.9 kW)15 kW (20 HP)25 hp (18.6 kW)
Work table or largest slab141¾ × 86⅝ in (3,600 × 2,200 mm); PVC faced with a rubber matLargest slab 144 × 84 in (3,658 × 2,134 mm)Not listedNot listed
Axis travel11¾ in (300 mm)Not listedX 3,500 · Y 2,250 · Z 350 mm (137¾ · 88⅝ · 13¾ in)X 140 · Y 130 · Z 18 in (3,556 · 3,302 · 457 mm)
Tilting tableNot listedPowered tilt table, 0–70°; confirm configurationNot listedNot listed
Control and softwarePLC with motion controller and cutting program; 15-inch touchscreen (not a PC)Manual and semi-automatic modes · laserCNC touchscreenTouchscreen in English, Spanish and Portuguese
Frame and guardingGalvanized machine frame with back panelNot listedNot listedNot listed
Machine size18 ft 10⅜ in × 13 ft 7⅜ in × 11 ft 5¾ in (5,750 × 4,150 × 3,500 mm)Not listedNot listedNot listed
Machine weight9,921 lb (4,500 kg)Not listedNot listedNot listed
Turbo: published specifications, group 2 of 3
SpecificationNext LevelTurboRye CorpHusky Gantry Bridge SawMatrix Machine CorpVISION Bridge SawMatrix Machine CorpICON Bridge Saw
Machine typeBridge saw with PLC controlGantry bridge sawEntry-level bridge sawBridge saw
Axes and head movementC 0–360° head rotation · A 0° and 46° tilt45° miter tiltAutomatic plunge miter 0–47°Automatic plunge miter 0–47°
Blade diameter13¾–19⅝ in (350–500 mm)Up to 18 in (457 mm)Not listedNot listed
Saw motor29.5 HP (22 kW) permanent-magnet motor, variable frequency, up to 4,000 rpm20 hp (14.9 kW)20 hp (14.9 kW)20 HP (14.9 kW) with variable-frequency drive
Work table or largest slab141¾ × 86⅝ in (3,600 × 2,200 mm); PVC faced with a rubber matRotating 6 × 10 ft tilt tableNot listedNot listed
Axis travel11¾ in (300 mm)16 in (406 mm) vertical travelNot listedNot listed
Tilting tableNot listedRotating tilt tableRotating hydraulic tilt tableRotating hydraulic tilt table
Control and softwarePLC with motion controller and cutting program; 15-inch touchscreen (not a PC)Wireless remote · optional 8-inch touchpadButton panel · green laser10-inch color touchscreen with AutoCut II programmable cutting · 8-position wireless remote · green laser
Frame and guardingGalvanized machine frame with back panelNot listedNot listedNot listed
Machine size18 ft 10⅜ in × 13 ft 7⅜ in × 11 ft 5¾ in (5,750 × 4,150 × 3,500 mm)Not listedNot listedNot listed
Machine weight9,921 lb (4,500 kg)Not listedNot listedNot listed
Turbo: published specifications, group 3 of 3
SpecificationNext LevelTurboDC IndustrialMonoblock 925MAX Bridge SawMTE BridgesawDiamond4 (4-axis bridge saw)Biesse (GMM)Master Cut GO C M (formerly GMM Extra 480)
Machine typeBridge saw with PLC controlMonoblock bridge saw4-axis bridge saw5-axis CNC bridge saw
Axes and head movementC 0–360° head rotation · A 0° and 46° tilt45° miter cuts90° rotating head5 axes
Blade diameter13¾–19⅝ in (350–500 mm)14–24 in (356–610 mm)12–16 in (305–406 mm)Up to 625 mm (24⅝ in)
Saw motor29.5 HP (22 kW) permanent-magnet motor, variable frequency, up to 4,000 rpm25 hp (18.6 kW) · blade 1,800–2,500 rpm20 hp (14.9 kW)13 / 16.5 kW (17.4 / 22.1 hp)
Work table or largest slab141¾ × 86⅝ in (3,600 × 2,200 mm); PVC faced with a rubber matNot listedWork envelope 138 × 79 in (3,505 × 2,007 mm)3,800 × 2,250 mm (149⅝ × 88⅝ in)
Axis travel11¾ in (300 mm)Not listedNot listedNot listed
Tilting tableNot listedNot listedHydraulic table rotates 360° and tilts 85°Not listed
Milling and tool changeNot listedNot listedNot listedSide spindle 4 kW, 12,000 rpm · 4-position tool changer
Vacuum cups to move piecesNot listedNot listedNot listedVacuum lifting up to 500 kg (1,102 lb)
CameraNot listedNot listedNot listedCamera listed
Control and softwarePLC with motion controller and cutting program; 15-inch touchscreen (not a PC)Touchscreen, remote control and buttonsSiemens touchscreen · wireless remote · laser-guided cuttingNot listed
Frame and guardingGalvanized machine frame with back panelNot listedGalvanized frameNot listed
Machine size18 ft 10⅜ in × 13 ft 7⅜ in × 11 ft 5¾ in (5,750 × 4,150 × 3,500 mm)Not listedNot listedNot listed
Machine weight9,921 lb (4,500 kg)Not listedNot listedNot listed

Buying from Next Level

  • Every product page shows the price in U.S. dollars.
  • Build your equipment list and download a PDF quote right away, in English, Spanish or Portuguese.
  • A Next Level technician installs the machine at your shop and trains your operators; the included hours are listed for each machine.
  • If Next Level does not deliver within the window in your signed contract, Next Level covers your scheduled monthly financing payments until the equipment arrives.

Read more in Questions and answers and the Granite CNC buying guide.

Sources

Comparison updated November 13, 2026. Every competitor figure comes from the maker’s own page below. Values in brackets are unit conversions by Next Level, rounded. “Not listed” means the maker’s page does not give the figure; it does not mean the machine lacks it.