Next Level

Orca Jet side by side with other waterjets

Pick up to 5 machines from other makers. The table shows the figures each maker publishes, next to the Orca Jet. Machines that cut stone with an abrasive waterjet, without a saw blade.

Compare with 3 of 5 picked

Pick up to 5. The table updates as you pick.

Swipe the table sideways to see every machine.

Orca Jet and the machines you picked: published specifications
SpecificationNext Level Orca JetFlow Mach 200 with Pivot+Maker’s page for the Flow Mach 200 with Pivot+ (opens in a new tab)Flow Mach 500 with Dynamic Waterjet XDMaker’s page for the Flow Mach 500 with Dynamic Waterjet XD (opens in a new tab)Breton HydraMaker’s page for the Breton Hydra (opens in a new tab)Donatoni J5.42Maker’s page for the Donatoni J5.42 (opens in a new tab)
Machine type5-axis abrasive waterjetWaterjet with the Pivot+ multi-axis head5-axis waterjet with the Dynamic Waterjet XD head5-axis waterjet5 interpolated axes waterjet
Axes and head movementC 360° · A 0–76°Not listedNot listedA ±60°A ±60° · C unlimited
Waterjet pump49.6 HP (37 kW)Not listedNot listedKMT pumpNot listed
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi workingPumps to 60,000 psi60,000 psi pumps; 94,000 psi (HyperJet) optionUp to 3,800 bar (60,000 psi)Not listed
Jet head tilt0–76° tiltUp to 60° bevel with taper compensationUp to 89° of wrist motion, active taper controlNot listedNot listed
Work table or largest slab165⅜ × 86⅝ in (4,200 × 2,200 mm)Work envelopes include 4020: 13 ft 1 in × 6 ft 6 in (4 × 2 m)Work envelopes include 4020: 13 ft 1 in × 6 ft 6 in (4 × 2 m)Not listedLargest slab 4,100 × 2,100 mm (161⅜ × 82⅝ in) · table load 3,000 kg (6,614 lb)
Axis travel153½ × 74¾ in; Z 5⅞–7⅞ in (3,900 × 1,900 mm; Z 150–200 mm)Z 8 in (203 mm)Z 12 in or 24 in (305 or 610 mm)Z 300 mm (11⅞ in)X 4,150 · Y 2,170 · Z 240 mm (163⅜ · 85½ · 9½ in)
Axis speeds20–49 ft/min (6–15 m/min)Not listedNot listedNot listedX / Y 0–30 m/min (0–98 ft/min)
Table configurationTilting table, hot-dip galvanizedNot listedNot listedNot listedNot listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasiveNot listedNot listed500 kg (1,102 lb) abrasive tank200 L abrasive tank
Accuracy±0.1 mm (±0.004 in) cutting · ±0.025 mm (±0.001 in) repeatabilityPositional ±0.002 in · repeatability ±0.001 inPositional ±0.0005 in · repeatability ±0.0008 in±0.1 mm over 4 × 2 mNot listed
Control and softwareMobile control cabinet with built-in display; PLC; independent power supply for drives, CNC and PLCFlowMaster or FlowXpert softwareFlowXpert softwareNot listedNot listed
Machine weight11,023 lb (5,000 kg)Not listedNot listedNot listedAbout 7,800 kg (17,196 lb)
Orca Jet: published specifications, group 1 of 2
SpecificationNext LevelOrca JetFlowMach 200 with Pivot+FlowMach 500 with Dynamic Waterjet XDBretonHydra
Machine type5-axis abrasive waterjetWaterjet with the Pivot+ multi-axis head5-axis waterjet with the Dynamic Waterjet XD head5-axis waterjet
Axes and head movementC 360° · A 0–76°Not listedNot listedA ±60°
Waterjet pump49.6 HP (37 kW)Not listedNot listedKMT pump
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi workingPumps to 60,000 psi60,000 psi pumps; 94,000 psi (HyperJet) optionUp to 3,800 bar (60,000 psi)
Jet head tilt0–76° tiltUp to 60° bevel with taper compensationUp to 89° of wrist motion, active taper controlNot listed
Work table or largest slab165⅜ × 86⅝ in (4,200 × 2,200 mm)Work envelopes include 4020: 13 ft 1 in × 6 ft 6 in (4 × 2 m)Work envelopes include 4020: 13 ft 1 in × 6 ft 6 in (4 × 2 m)Not listed
Axis travel153½ × 74¾ in; Z 5⅞–7⅞ in (3,900 × 1,900 mm; Z 150–200 mm)Z 8 in (203 mm)Z 12 in or 24 in (305 or 610 mm)Z 300 mm (11⅞ in)
Axis speeds20–49 ft/min (6–15 m/min)Not listedNot listedNot listed
Table configurationTilting table, hot-dip galvanizedNot listedNot listedNot listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasiveNot listedNot listed500 kg (1,102 lb) abrasive tank
Accuracy±0.1 mm (±0.004 in) cutting · ±0.025 mm (±0.001 in) repeatabilityPositional ±0.002 in · repeatability ±0.001 inPositional ±0.0005 in · repeatability ±0.0008 in±0.1 mm over 4 × 2 m
Control and softwareMobile control cabinet with built-in display; PLC; independent power supply for drives, CNC and PLCFlowMaster or FlowXpert softwareFlowXpert softwareNot listed
Machine weight11,023 lb (5,000 kg)Not listedNot listedNot listed
Orca Jet: published specifications, group 2 of 2
SpecificationNext LevelOrca JetDonatoniJ5.42
Machine type5-axis abrasive waterjet5 interpolated axes waterjet
Axes and head movementC 360° · A 0–76°A ±60° · C unlimited
Waterjet pump49.6 HP (37 kW)Not listed
Waterjet pressure65,000 psi (450 MPa) rated; 46,000–55,000 psi workingNot listed
Jet head tilt0–76° tiltNot listed
Work table or largest slab165⅜ × 86⅝ in (4,200 × 2,200 mm)Largest slab 4,100 × 2,100 mm (161⅜ × 82⅝ in) · table load 3,000 kg (6,614 lb)
Axis travel153½ × 74¾ in; Z 5⅞–7⅞ in (3,900 × 1,900 mm; Z 150–200 mm)X 4,150 · Y 2,170 · Z 240 mm (163⅜ · 85½ · 9½ in)
Axis speeds20–49 ft/min (6–15 m/min)X / Y 0–30 m/min (0–98 ft/min)
Table configurationTilting table, hot-dip galvanizedNot listed
Abrasive feed100 L; holds 331 lb (150 kg) of abrasive200 L abrasive tank
Accuracy±0.1 mm (±0.004 in) cutting · ±0.025 mm (±0.001 in) repeatabilityNot listed
Control and softwareMobile control cabinet with built-in display; PLC; independent power supply for drives, CNC and PLCNot listed
Machine weight11,023 lb (5,000 kg)About 7,800 kg (17,196 lb)

Buying from Next Level

  • Every product page shows the price in U.S. dollars.
  • Build your equipment list and download a PDF quote right away, in English, Spanish or Portuguese.
  • A Next Level technician installs the machine at your shop and trains your operators; the included hours are listed for each machine.
  • If Next Level does not deliver within the window in your signed contract, Next Level covers your scheduled monthly financing payments until the equipment arrives.

Read more in Questions and answers and the Routers and waterjets.

Sources

Comparison updated November 12, 2026. Every competitor figure comes from the maker’s own page below. Values in brackets are unit conversions by Next Level, rounded. “Not listed” means the maker’s page does not give the figure; it does not mean the machine lacks it.