Next Level

Flash Plus 10 side by side with other horizontal inline polishers

Pick up to 5 machines from other makers. The table shows the figures each maker publishes, next to the Flash Plus 10. Horizontal inline polishers that feed stone slabs lying flat for continuous edge finishing.

Compare with 3 of 5 picked

Pick up to 5. The table updates as you pick.

Swipe the table sideways to see every machine.

Flash Plus 10 and the machines you picked: published specifications
SpecificationNext Level Flash Plus 10Park Industries VELOCITYMaker’s page for the Park Industries VELOCITY (opens in a new tab)Marmo Meccanica Horizontal edge polishersMaker’s page for the Marmo Meccanica Horizontal edge polishers (opens in a new tab)Donatoni ES40Maker’s page for the Donatoni ES40 (opens in a new tab)Donatoni ES47Maker’s page for the Donatoni ES47 (opens in a new tab)Poseidon Trident Edge PolisherMaker’s page for the Poseidon Trident Edge Polisher (opens in a new tab)
Machine typeHorizontal CNC profile edge polisherSingle-pass horizontal decorative edgerHorizontal edge polishers: LCR, LTX and LCHFlat-edge polisher, 3,840 mm benchFlat-edge polisher, 4,700 mm benchEdge polisher
Heads10 heads in selectable wheel groups12 spindlesLCR: 7 polishing spindles (up to 9) · LTX: 6 oscillating + 2 chamfering + 1 calibrating · LCH: 7 (up to 9) + bevel spindlesUp to 11 configurable heads (1.5 kW, Ø 150 mm) + top and bottom chamfer groupUp to 16 configurable heads (1.5 kW polishing, 2.2 kW diamond bevel)14 heads, 6 spindles
Edges it makesProfiles with diamond profile wheels and wet polishing pads70 stored profiles: flat, radius, bullnose, half-bullnose, TLCR: flat edge, 45° bevels, pencil rounds · LTX: full and half bullnose · LCH: flat edge and bevelNot listedNot listedBullnose, half bullnose, bevel, flat, ogee
Slab thickness¼–2⅜ in (5–60 mm)2–6 cm (¾–2⅜ in)LCR up to 60 mm · LTX 10–100 mm flat, 20–80 mm rounded · LCH 6–60 mmUp to 50 mm (2 in)Up to 50 mm (2 in)Not listed
Piece sizeMinimum 50 × 50 mm (2 × 2 in)Pieces 24–144 in long, 4–144 in wide · radius up to 3 inMinimum 270 mm (10⅝ in) longMinimum width 50 mm (2 in) · 600 mm beltMinimum width 50 mm (2 in) · 600 mm beltNot listed
Feed speed1.6–9.8 ft/min (0.5–3 m/min)12–24 in/min (0.3–0.6 m/min), by edgeNot listedNot listedNot listed1–3 ft/min (0.3–0.9 m/min)
Power41 kWNot listedFrom 27.5 kW (LCR), 28 kW (LTX), 13.1 kW (LCH)25 kW installed25 kW installedNot listed
ControlCNC PLC, 10-inch touchscreen, stored recipesNot listedNot listed18.5-inch touchscreen with D-EDGE recipes18.5-inch touchscreen · automatic positioning of the unitsNot listed
Machine sizeNot listedNot listedNot listedNot listedNot listed17 or 21 ft long (5.2 or 6.4 m)
Machine weight11,023 lb (5,000 kg)17,000 lb (7,711 kg)Not listedAbout 3,000 kg (6,614 lb)About 3,800 kg (8,378 lb)Not listed
Flash Plus 10: published specifications, group 1 of 2
SpecificationNext LevelFlash Plus 10Park IndustriesVELOCITYMarmo MeccanicaHorizontal edge polishersDonatoniES40
Machine typeHorizontal CNC profile edge polisherSingle-pass horizontal decorative edgerHorizontal edge polishers: LCR, LTX and LCHFlat-edge polisher, 3,840 mm bench
Heads10 heads in selectable wheel groups12 spindlesLCR: 7 polishing spindles (up to 9) · LTX: 6 oscillating + 2 chamfering + 1 calibrating · LCH: 7 (up to 9) + bevel spindlesUp to 11 configurable heads (1.5 kW, Ø 150 mm) + top and bottom chamfer group
Edges it makesProfiles with diamond profile wheels and wet polishing pads70 stored profiles: flat, radius, bullnose, half-bullnose, TLCR: flat edge, 45° bevels, pencil rounds · LTX: full and half bullnose · LCH: flat edge and bevelNot listed
Slab thickness¼–2⅜ in (5–60 mm)2–6 cm (¾–2⅜ in)LCR up to 60 mm · LTX 10–100 mm flat, 20–80 mm rounded · LCH 6–60 mmUp to 50 mm (2 in)
Piece sizeMinimum 50 × 50 mm (2 × 2 in)Pieces 24–144 in long, 4–144 in wide · radius up to 3 inMinimum 270 mm (10⅝ in) longMinimum width 50 mm (2 in) · 600 mm belt
Feed speed1.6–9.8 ft/min (0.5–3 m/min)12–24 in/min (0.3–0.6 m/min), by edgeNot listedNot listed
Power41 kWNot listedFrom 27.5 kW (LCR), 28 kW (LTX), 13.1 kW (LCH)25 kW installed
ControlCNC PLC, 10-inch touchscreen, stored recipesNot listedNot listed18.5-inch touchscreen with D-EDGE recipes
Machine weight11,023 lb (5,000 kg)17,000 lb (7,711 kg)Not listedAbout 3,000 kg (6,614 lb)
Flash Plus 10: published specifications, group 2 of 2
SpecificationNext LevelFlash Plus 10DonatoniES47PoseidonTrident Edge Polisher
Machine typeHorizontal CNC profile edge polisherFlat-edge polisher, 4,700 mm benchEdge polisher
Heads10 heads in selectable wheel groupsUp to 16 configurable heads (1.5 kW polishing, 2.2 kW diamond bevel)14 heads, 6 spindles
Edges it makesProfiles with diamond profile wheels and wet polishing padsNot listedBullnose, half bullnose, bevel, flat, ogee
Slab thickness¼–2⅜ in (5–60 mm)Up to 50 mm (2 in)Not listed
Piece sizeMinimum 50 × 50 mm (2 × 2 in)Minimum width 50 mm (2 in) · 600 mm beltNot listed
Feed speed1.6–9.8 ft/min (0.5–3 m/min)Not listed1–3 ft/min (0.3–0.9 m/min)
Power41 kW25 kW installedNot listed
ControlCNC PLC, 10-inch touchscreen, stored recipes18.5-inch touchscreen · automatic positioning of the unitsNot listed
Machine sizeNot listedNot listed17 or 21 ft long (5.2 or 6.4 m)
Machine weight11,023 lb (5,000 kg)About 3,800 kg (8,378 lb)Not listed

Buying from Next Level

  • Every product page shows the price in U.S. dollars.
  • Build your equipment list and download a PDF quote right away, in English, Spanish or Portuguese.
  • A Next Level technician installs the machine at your shop and trains your operators; the included hours are listed for each machine.
  • If Next Level does not deliver within the window in your signed contract, Next Level covers your scheduled monthly financing payments until the equipment arrives.

Read more in Questions and answers and the Stone polishing machines.

Sources

Comparison updated November 12, 2026. Every competitor figure comes from the maker’s own page below. Values in brackets are unit conversions by Next Level, rounded. “Not listed” means the maker’s page does not give the figure; it does not mean the machine lacks it.